Home > Exhibition > Content

Product Categories

CONTACT US
ADD: No.124,Yutian Rd,Hetiansha Dt,Shijie Tn,Dongguan City,Guangdong Province.China
M.B: +8615362614931
TEL: +86-769-82750877
FAX: +86-769-82713435
E-mail: roy@topshall.com
Metal Power LED signal lamp indicator Detailed instructions
Jan 06, 2018

Metal power led light signal lamp indicator is a kind of indicator light. The number of times the power indicator flashes continuously represents the indoor unit fault code. Power Supply Lights: Each hot-swappable power supply has an indicator light on it that provides information about the power status, faults, and power supplies.

Indicator code

On: The system is powered on and operating.

Off: indicates that the system is not powered on yet.

Blinking: The system is receiving power, but is in a wait state.

Using the power metal pushbutton light (two-color led) located on the front of the computer indicates different states by light up, flashing, or steady:

If the power light is off, the computer is either turned off or not powered on.

Reset the power cable in the power connector and the electrical outlet on the back of the computer.

power indicator.jpg

If you are connecting your computer to a power strip, make sure that the power strip is connected to an electrical outlet and that the power strip is turned on. Also, bypass the power protection devices, power strips, and power extension cables to verify that the computer is on.

Use another device (such as a lamp) to test the outlet and make sure the outlet is working properly.

If the power light indicator is solid green and the computer is not responding:

Make sure the monitor is connected and the power is on.

If the monitor is connected and the power is on, see the beep code.

If the power light signal lamp indicator is flashing green, the computer is in standby mode. Press any key on the keyboard, move the mouse or press the power button to resume normal operation. If the power light signal lamp indicator is green and the computer is not responding:

Make sure the monitor is connected and the power is on.

If the monitor is connected and the power is on, see the beep code.

If the power light is steady amber, the computer is receiving power, but the device may be malfunctioning or not properly installed.

TOPSHALL introduced to you several kinds of metal power led signal lamp indicator on the market, with easy to do, electricity safety, minimal power consumption and so on.


Quick Navigation
  • About Us
  • Products
  • News
  • Exhibition
  • Contact Us
  • Feedback
  • Newsletter
    Enter in your email address to receive deals and coupons.
    +86-769-82750877
    +8615362614931 roy@topshall.com